The new goAardvark is here! Find out what's new.

goAardvark

PM schedule · Skid steer loader

John Deere 332G maintenance schedule

Service intervals, fluids and filters for the John Deere 332G. Full specs, part numbers and heavy-duty intervals are in goAardvark.

  • Series G
  • Size class Large frame
Snapshot my fleet

Source: John Deere 332G Skid Steer Replacement Parts Guide (Mar 2022) and Uptime Maintenance Planner T359140X19 (PIN 1T0332G__F300253-) · Last verified October 29, 2026 · Always confirm with the operator's manual for your serial number

What's due next?

Enter the hour meter (SMU) reading to see what's coming up.

hr
  • 1,500 hr service

    Includes 1,000 hr, 500 hr, 250 hr

    at 3,000In 160 hr
  • 250 hr service

    at 3,250In 410 hr
  • 500 hr service

    Includes 250 hr

    at 3,500In 660 hr
  • 250 hr service

    at 3,750In 910 hr

Shows the next four service stops. Red means due within 50 hours; amber, within 250. goAardvark tracks this automatically from telematics hours, across every make in your fleet.

The short answer

On the John Deere 332G, change the engine oil every 500 service hours. Change the hydraulic oil every 1,000 hours. The engine oil system holds 12.6 L (3.3 US gal).

Service intervals

Pick an interval. Each service includes everything from the shorter intervals that fall on the same hour.

Every day

0 of 4 done

Fluids and capacities 3 of 4 shown

SystemSpecCapacity
Engine oilJohn Deere Plus-50 II12.6 L3.3 gal
Hydraulic and hydrostatic systemJohn Deere Hydrau33.1 L8.7 gal
Chain case (listed per side)John Deere Hy-Gard20.8 L5.5 gal
Cooling systemAvailable in goAardvarkAvailable in goAardvark

1 more systems with specs and capacities are in goAardvark.

Unlock full specs

Filters 2 of 15 shown

FilterPart numberChange at
Engine oil filterAvailable in goAardvark500 hr
Hydraulic oil filterAvailable in goAardvark1,000 hr
Hydrostatic oil filterAvailable in goAardvarkAvailable in goAardvark
Primary fuel filterAvailable in goAardvarkAvailable in goAardvark
Final fuel filterAvailable in goAardvarkAvailable in goAardvark
Hydraulic reservoir breatherAvailable in goAardvarkAvailable in goAardvark
Engine air filter, primaryAvailable in goAardvarkAvailable in goAardvark
Engine air filter, secondaryAvailable in goAardvarkAvailable in goAardvark
Dust unloader valveAvailable in goAardvarkAvailable in goAardvark
DEF dosing unit filterAvailable in goAardvarkAvailable in goAardvark
DEF header suction filter and baffleAvailable in goAardvarkAvailable in goAardvark
DEF tank breatherAvailable in goAardvarkAvailable in goAardvark
Cab fresh air filterAvailable in goAardvarkAvailable in goAardvark
Cab recirculation filterAvailable in goAardvarkAvailable in goAardvark
Diesel particulate filterAvailable in goAardvarkAvailable in goAardvark

All 15 filters with part numbers are in goAardvark.

Unlock full specs

Fleet PM snapshot

Add up to 5 machines to see when each one hits its next service. This is free and needs no sign-up.

MachineHours nowHours per weekNext serviceAround

1,500 hr at 3,000

160 hr
Dec 8
1 of 5 machines
This snapshot is out of date as soon as the machines run. If your John Deere 332G runs 52 hr a week instead of 40, its service lands around Dec 2. If it sits at 24 hr a week, around Dec 27. goAardvark reads real hours from Cat, Deere, Komatsu and Volvo telematics every day, so the dates stay right.
See it live with your fleetRequest a demo and we'll show these machines in goAardvark.

Official John Deere maintenance resources

Your 332G isn't the only machine due for service

Most fleets run several makes side by side. Each has its own manual, intervals and telematics portal. goAardvark pulls hours from all of them and builds one PM schedule for the whole fleet.

Compare similar skid steer loaders

Frequently asked questions

Every 500 service hours under normal operating conditions. Confirm the interval for your serial number in the operator's manual.

Sources

John Deere and other product names are trademarks of their owners. goAardvark is not affiliated with any equipment manufacturer. This page summarizes public information for planning; your operator's manual is the authority for your serial number.

Preventive maintenance · Field checklist

John Deere 332G PM checklist

Unit #
Serial number
Hour meter
Technician
Date

Daily

Service taskComponent
Check engine oil levelEngine
Check coolant levelCooling
Check hydraulic oil levelHydraulics
Lubricate boom linkage, cylinder pivots and Quik-TatchLinkage

50 hr

Service taskComponent
Check and clean dust unloader valveEngine

250 hr

Service taskComponent
Take engine oil sampleEngine

500 hr

Service taskComponent
Change engine oil and filterEngine
Check chain case oil levelDrivetrain
Replace primary fuel filter and water separatorFuel
Replace final fuel filterFuel
Replace hydraulic reservoir breatherHydraulics
Take hydraulic oil and coolant samplesMachine

1,000 hr

Service taskComponent
Check coolant conditionCooling
Replace fuel tank breatherFuel
Change hydraulic oil and replace filtersHydraulics
Change chain case oilDrivetrain

1,500 hr

Service taskComponent
Check and adjust engine valve lashEngine

2,000 hr

Service taskComponent
Replace DEF dosing unit filterAftertreatment
Replace DEF header suction filter and baffleAftertreatment
Clean DEF tankAftertreatment

4,000 hr

Service taskComponent
Replace DEF tank breatherAftertreatment

6,000 hr

Service taskComponent
Drain and refill cooling systemCooling

When required

Service taskComponent
Check and clean cooling packageCooling
Check tire pressureAxles
Drain primary fuel filter and water separatorFuel
Drain water and sediment from fuel tankFuel
Replace primary engine air filterEngine
Replace secondary engine air filterEvery third primary filter change or as needed.Engine
Clean and tighten battery terminalsElectrical
Check cab fresh air and recirculation filtersIf equipped.Cab
Check wheel lug nut torqueAxles
Check accessory drive beltEngine
Service exhaust filterAftertreatment
Check and adjust steering mistrackingDrivetrain

Source: John Deere 332G Skid Steer Replacement Parts Guide (Mar 2022) and Uptime Maintenance Planner T359140X19 (PIN 1T0332G__F300253-). Always confirm with the operator's manual for your serial number.